Hi everybody,

I just got a USB cable to connect my Samsung SGH-E700 mobile phone. However, udev does not create a device node in /dev so I cant try kmobiletools with my phone. The output to the syslog while plugging in the phone is:

Jun 17 22:27:09 localhost kernel: usb 1-1.1: new full speed USB device using uhci_hcd and address 10
Jun 17 22:27:09 localhost NetworkManager: ^I[1150576029.630459] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_6547_232_noserial').
Jun 17 22:27:09 localhost NetworkManager: ^I[1150576029.833282] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_6547_232_noserial_if0').
Jun 17 22:27:10 localhost NetworkManager: ^I[1150576030.165230] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_6547_232_noserial_usbraw').

lusb shows:

Bus 001 Device 010: ID 6547:0232

lsusb -v gets me:

Bus 001 Device 010: ID 6547:0232
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x6547
idProduct 0x0232
bcdDevice 0.01
iManufacturer 1 ArkMicroChips
iProduct 3 USB-UART Controller
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)

Any hints on what to do next?

Best regards,

Stefan