Hi,

I've checked out the latest kmobiletools version from svn. I know this is a beta and i didn't really expect this would work at first go. Well, perhaps i've also forgot something really important...

After having compiled kmobiletools successfully i wanted to connect my "Samsung SGH E700".

the mobile seemes to be found. This is what usbview tells me:

USB-UART Controller
Manufacturer: ArkMicroChips
Speed: 12Mb/s (full)
USB Version:  1.10
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 64
Number of Configurations: 1
Vendor Id: 6547
Product Id: 0232
Revision Number:  0.01

Config Number: 1
	Number of Interfaces: 1
	Attributes: 80
	MaxPower Needed: 500mA

	Interface Number: 0
		Name: ark3116
		Alternate Number: 0
		Class: ff(vend.) 
		Sub Class: 0
		Protocol: 0
		Number of Endpoints: 3

			Endpoint Address: 81
			Direction: in
			Attribute: 3
			Type: Int.
			Max Packet Size: 4
			Interval: 1ms

			Endpoint Address: 02
			Direction: out
			Attribute: 2
			Type: Bulk
			Max Packet Size: 64
			Interval: 0ms

			Endpoint Address: 82
			Direction: in
			Attribute: 2
			Type: Bulk
			Max Packet Size: 64
			Interval: 0ms

dmesg:

commanace@cPC:~$ dmesg | grep ark
drivers/usb/serial/usb-serial.c: USB Serial support registered for ark3116
ark3116 1-1:1.0: ark3116 converter detected
usb 1-1: ark3116 converter now attached to ttyUSB0
usbcore: registered new driver ark3116
ark3116 ttyUSB0: ark3116 converter now disconnected from ttyUSB0
ark3116 1-1:1.0: device disconnected
ark3116 1-2:1.0: ark3116 converter detected
usb 1-2: ark3116 converter now attached to ttyUSB0

So the mobile should be attached to /dev/ttyUSB0 ...

Now i tried to run the wizard. I've chosen the AT Engine and selected "USB Cable" (including /dev/ttyUSB0 as device)

Device Options where left as they were found:

Init. String: "AT S7=45 S0=0 V1 X4 &c1 E0"
Sec. Init. String: ""
Con. Speed: "115200 (115 kbps)"

But after "probing the devices" i only see an empty list... my mobile seems not to be detected.

With kmobiletools 0.4 i already managed to detect that mobile. But now i switched to svn Head because 0.4 doesn't offer the functionality i need...

Does anybody know how to fix that?
Thanks in advance
Cce