I'm not able to find my Nokia 6630 connected w/ the USB cable which came along with it w/ it in KMobileTools.
In the hardwareidentification of YAST it was found.
Here is what was found with YAST - hardwareidentification:

74: USB 00.0: 0000 Unclassified device
[Created at usb.123]
UDI: /org/freedesktop/Hal/devices/usb_device_421_410_noserial_if0
Unique ID: 7bWa.+IYY+nKV+c8
Parent ID: pBe4.kpBJezu2Cv9
SysFS ID: /devices/pci0000:00/0000:00:02.1/usb2/2-3/2-3:1.0
SysFS BusID: 2-3:1.0
Hardware Class: unknown
Model: "Nokia Mobile Phones Nokia 6630"
Hotplug: USB
Vendor: usb 0x0421 "Nokia Mobile Phones"
Device: usb 0x0410 "Nokia 6630"
Speed: 12 Mbps
Module Alias: "usb:v0421p0410d0000dc02dsc00dp00ic02isc08ip01"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #73 (Hub)

85: USB 00.8: 10200 Modem
[Created at usb.123]
UDI: /org/freedesktop/Hal/devices/usb_device_421_410_noserial_if8_serial_unknown_0
Unique ID: +HTX.AI8vYc9QRP5
Parent ID: pBe4.kpBJezu2Cv9
SysFS ID: /devices/pci0000:00/0000:00:02.1/usb2/2-3/2-3:1.8
SysFS BusID: 2-3:1.8
Hardware Class: modem
Model: "Nokia Mobile Phones Nokia 6630"
Hotplug: USB
Vendor: usb 0x0421 "Nokia Mobile Phones"
Device: usb 0x0410 "Nokia 6630"
Driver: "cdc_acm"
Device File: /dev/ttyACM0
Speed: 12 Mbps
Init1: ATZ
Init2: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Module Alias: "usb:v0421p0410d0000dc02dsc00dp00ic02isc02ip01"
Driver Info #0:
Driver Status: cdc_acm is active
Driver Activation Cmd: "modprobe cdc_acm"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #73 (Hub)

I hope someone can help me with my problem.
Thank you very much, already for reading it all!
HM